FREE Shipping at $100 *UPS Ground in the contiguous U.S.A.

Black PowerHead Screws

Black PowerHead Screws

SKU: -

SHARE:

The PowerHead Screw is now available in a sleek & tough black oxide coating. The oversized head completely eliminates pull-through, has 4x the holding power than a conventional screw and can be finished with a 9/16" FastCap.See the Entire PowerHead Screw Family.

Powerhead Screw Overview
Powerhead Screws with Torx Drive
Torx Drive Test
Load Test
PowerHead Screws Display
Butt Joint
Pool Table
With Drywall
Workshop Addict Review

Shear Load Rating: 300 lb.
Shear Load Peak: 500 lb.

PowerHead-Screws-Black-Oxide-Specs

  1. Rich of Workshop Addict03/14/2014

    Check out my review

Add a Review

How well do PowerHead Screws fasten to MDF board? Do I have to pre-drill?

PowerHead Screws will fasten to MDF boards and there is no need to pre-drill. However, it is recommended to test drilling a screw into a sample piece of MDF before beginning the final project. Depending on the manufacturer of the MDF board, varying amounts of glue are used in different boards. If a large amount of glue is used in the board, there is a greater chance that the board will crack and/or develop a bump when the screw is drilled into the board. If the tested area does crack or bump, it is recommended, in this case, to pre-drill.