Peel and Stick
- Fastcaps and Fastedge
- Peel & Stick Accessories
- Artisan Planes
- PowerHead Screws
- Pro Carpenter Tape Measures
Adhesives and Filler Systems
General Topics and Sales Help
Do you have a product idea?
Fastcaps and Fastedge
Are any of your real wood Fastcaps rift cut, and if not can you get a different cut?
No, none of our Fastcaps are rift cut and unfortunately we are not able to get a different cut because of the large quantity we would have to order.
How thick are your Fastedge and Fastcaps?
Our material thicknesses including the adhesive are as follows: PVC= .025" Unfinished Real Wood= .035" Prefinished Real Wood= .028".
I am purchasing FastEdge for the first time. Is it better to buy a width that is bigger than the edge I am applying it to or should I buy the exact width I need?
It is best to buy a width a little wider than what you need so it is quick and easy to apply to the edge and trim it without having to stress about lying it down exactly right. We also strongly recommend watching ALL of our FastEdge videos. Our videos are just a few minutes long and by the time you're done watching them, you'll be a FastEdge pro in no time!
I just applied Fastedge to my project and there is adhesive oozing from the sides. How do I clean this up??
You must be very careful when you are trying to clean excess adhesive off when using any kind of chemical, because you run the risk of causing the FastEdge adhesive to fail and start curling up on the sides. Try using a razorblade to carefully scrape the excess adhesive.
I need to match a laminate for my project. Can you help me find a match to your Fastcaps and Fastedge.
We have 70 stock colors in our Fastcaps and Fastedge, and we can also match custom colors for you.* If you know the laminate or melamine brand that will make matching much easier. Call us at 1-888-443-3748 with the color information and we can see what we have available. *Availablity varies depending on color material.
Peel and Stick Accessories
I have one of your old Virutex trimmers and I need new blades, will the Quad Trimmer blades work on the old trimmer?
No they will not work but we would be more than happy to upgrade you, just give us a phone call at: 1-888-443-3748.
How thick is your SpeedTape?
Our SpeedTape is the thickest double sided adhesive on the market at 5.5 mils thick.
How does 2P-10 stand up in a wet environment like on a boat. Can it be submerged in water?
Thank you for your question and FastCap apologizes for the delay in giving you a quicker answer! All of our 2P-10 products are able to be submerged in water, but the adhesive must be completely bonded and DRY beforehand. All of our adhesives would work fine within a boat setting if applied correctly. You must make sure that both surfaces are dry and clear of debris before application and we also recommend that you use our 2p-10 activator to speed up the cure time.
Is there a product that will delay the bonding of the 2P-10 to allow more open time when gluing two sheets of glass together?
The 2P-10 jel has a longer open time, up to about a 1/2 hour. If your using the thick or medium it about 10-15 min. We have nothing to delay the open time but you can always have it sit in a cool dry area. Please call us with any other questions at 1-888-443-3748.
What is the open time for 2P10?
For medium, thick and jel adhesives, give it 1/2 hour before it starts to harden. the jel's open time tends to be longer because it is much thicker.
Does the 3rd Hand come with a manual or have I lost it?
No, we don't have a manual for the 3rd Hand, but we have tons of great videos online that you can watch. Click here.
I lost my little black 3" X 3" articulating feet for my 3rd Hand, can I buy some extras?
No problem! If you need some feet replaced, email our customer service (firstname.lastname@example.org) your name, address, phone number, and how many feet you need replaced and we will send them to you as soon as possible at no charge!
Is there a warranty for your Third Hand line? I have one where the ball detent shared off. It's less than a year old and was only used as a temporary wall while spraying,i.e. no subtantial loads were placed on it.
Absolutley! We will replace the parts at no cost. We gaurantee everything 100%. Please give us a call and we will get the replacments out to you right away. 1-888-443-3748.
I've broken the plastic "pump" handle. Can I purchase a replacement part?
Yes! All of our products are 100% guaranteed! Our 3rd hand handles are very complicated to put back on, so what we do is just send you out a whole new 3rd hand for your convienience and you don't even need to return the broken one. Just give us a call at 1 888 443 3748 and we'll get one sent out to you!
How can I buy some replacement Micro-adjustable articulating bottom foot pads for my 3rd hand?
Your local distributor that you have purchased your 3rd hand from should be able to help you with that. Or if not, then call us at 1-888-443-3748 and we would be happy to assist you.
When I recieved my 3rd hand it came with one small pad and one large Big Foot Accessory. Should it have come with two small foot pads and not one. How can I get a second small foot pad? I purchased it from Duluth Trading Co.
We are sorry for the delay in getting you an answer. Please call Duluth Trading Co. and they will be happy to send a replacement on whatever you need that was missing.
The blade on my Artisan Plane has gotten dull, do you have replacement blades?
No, we don't but the blades have been designed to be resharpened. If you do not have a tool to resharpen the blade, just give us a phone call and we will help you: 1-888-443-3748.
Does the FastPatch work to seal holes in hot tub lids?
Yes! It definitely does! The humidity doesn't even affect it at all! Open or closed, the FastPatch will seal any hole in your hot tub lid without any problems! Plus, you can barely even see it!
How well do Power Head Screws fasten to MDF board? Do I have to pre-drill?
Power Head Screws will fasten to MDF boards, and there is no need to pre-drill. However, it is recommended to test drilling a screw into a sample piece of MDF before beginning the final project. Depending on the manufacturer of the MDF board, varying amounts of glue are used in different boards. If a large amount of glue is used in the board, there is a greater chance that the board will crack and/or develop a bump when the screw is drilled into the board. If the tested area does crack or bump, it is recommended in this case to pre-drill.
ProCarpenter Tape Measures
The center spring of my tape measure snapped and broke. Can I get a new spring to fix it?
No problem! We stand behind our products 100% for a lifetime, so just email us your address, phone number, and which ProCarpenter tape measure you have at email@example.com or you can also call us at 888-443-3748 and we will get a new tape measure out to you ASAP.
There is an oily substance coming from my tape measure. Is it harmful and how do I clean it?
The substance coming from your tape measure is a plasticizer, and it is not harmful. This might happen over time, but we are more than happy to replace your tape measure. Email us your address, phone number, and which ProCarpenter tape measure you have at firstname.lastname@example.org or you can also call us at 1-888-443-3748 and we will get a new tape measure out to you ASAP.
I have a Flatback 16' Pro Carpenter tape measure that is about a month old. The main lock will not hold the blade in place, while the one on the bottom works fine. I bought two of these tapes and the other one works fine. I was wondering, is there a warranty.
Our products are 100% guaranteed so call the distributor that your bought the tape measure from and they will replace it for you or call us at 1-888-443-3748 with any other questions!
I do not see the wax kit for plugging nail holes.
On our website, the waxkit is found in the main menu under PRODUCTS -> ADHESIVE AND FILLER SYSTEMS -> SOFTWAX, or click here. Please call us if you have any other questions at 1-888-443-3748.
Can I install the Speedbraces more than 16" apart?
You can do 32" on center, but it really depends on the type of material you are using as the shelf, countertop, etc.. When weight is applied and the material sags inbetween the braces, the Speedbraces will twist and ultimately will fail. As long as there is no sag inbetween each Speedbrace, and you install into studs, they will still hold up to 1000 lbs.
Do you sell direct or do I have to purchase through a distributor?
You can order from us online, over the phone (1-888-443-3748), or even come right into our showroom located in beautiful Bellingham, WA!! Or, if you would like to find one of our fabulous distributors close to you, follow this link to find one near you.
Do you have dealer in my country?
Thank you for asking. This link will list our many dealers around the world. They carry most of our products and they should be able to help you.
How do I sign up for a FastCap facility tour?
Contact Paul for a Skype interview (email@example.com).