PowerHead Metal Screws
The PowerHead Screws for Metal have more holding power, finer threads, and a drill-point head to easily tap into steel studs for maximum holding power. Finish with a 9/16" or 18mm Fastcap in a wide variety of materials, colors, and finishes. See the entire PowerHead Screw Family.
The Torx head Metal PowerHead Screw will only be available for a limited time. So get them while supplies last!
Shear Load Rating: 300 lb.
Shear Load Peak: 500 lb.
How well do PowerHead Screws fasten to MDF board? Do I have to pre-drill?
PowerHead Screws will fasten to MDF boards and there is no need to pre-drill. However, it is recommended to test drilling a screw into a sample piece of MDF before beginning the final project. Depending on the manufacturer of the MDF board, varying amounts of glue are used in different boards. If a large amount of glue is used in the board, there is a greater chance that the board will crack and/or develop a bump when the screw is drilled into the board. If the tested area does crack or bump, it is recommended, in this case, to pre-drill.
Average Ratings: 5Write a Review